Tutorial:  How To Make An IR Mini Emitter

Tools Parts
Stanley knife, or very sharp blade Screw cover
Small drill bit Infra red LED (Maplin code CH10)
Hot glue gun Screened cable
Soldering iron and solder 3.5mm mono jack plug (Maplin code HF81)

Step 1

  Start by using a very sharp knife to remove  the small plastic hinge joining the two sections of the screw cover together.

Next Step>

This tutorial created by James Hoye based on a design and working example by Keith Doxey
Copyright © 2001 James Hoye and Keith Doxey